Profiles the specific sensitivity levels of your camera's imaging sensor for exacting light readings.

Exposures accurate down to a tenth-of-a-stop in full-stop mode for both ambient and electronic flash light readings with a repeat accuracy of +/- 0.1 EV. Meter can also display shutter-speeds and apertures in half or third-stop increments to mirror the exposure settings on your camera. Flash exposures can be recorded cumulatively or non-cumulatively.

Built-in 1-degree spot meter features an adjustable diopter (-2.5 to 1.0d), and is threaded for 30.5mm filters and/or lens hood (a tethered lens cap is included).

The L-758DR's head swivels 270-degrees allowing you to 'walk the set' while maintaining constant visual contact with the meter's LCD display. Flash exposures can be taken with or without a tethered PC cord.

Rental price : 30 €

Up to 9 readings can be stored for meter averaging and contrast evaluations in aperture and shutter priority modes.
Mid-tone button allows you to shift the highlights or shadows to within the dynamic range of the profiled exposure reading.

Incident readings of three-dimensional objects are taken using the Lumisphere, which can be retracted for selective, narrower-field readings such as contrast ratio for flash lighting or for flat-field objects such as artwork.

For mixed lighting scenarios, the Sekonic L-758DR DigitalMaster displays the combined exposure values of both flash and ambient light sources, including the percentage of flash in total exposure in 10-percent increments.
Dual ISO buttons allow for quick exposure referencing when working with two differing film speeds, film and Polaroids, or other shooting scenarios involving dual ISO ratings.